Safety Guidelines - Motorola BSR 2000 Installation Manual

Safety Guidelines

The guidelines in this section are intended to protect you and the BSR 2000. These
guidelines discuss only some of the potential hazards you might encounter while
working. Be alert, and always exercise good judgement.
Perform only the procedures described in this installation guide. Make sure that only
trained service personnel perform other services.
526359-001
Keep the installation area free from dust during and after installation.
Keep tools and equipment away from areas where people could trip over them
while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which
can become caught in equipment.
Use safety glasses when working under conditions that can be hazardous to your
eyes.
Do not perform any actions that create a potential hazard to people or cause
equipment to become unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Do not install wiring during electrical storms.
Do not install electrical outlets in wet locations unless the outlets are specifically
designed for wet environments.
Replace fuses only with fuses of the same type and rating.
Do not open the BSR 2000 enclosure unless a procedure in this document
instructs you to do so. Opening the enclosure increases the risk of severe
electrical shock. Only trained service personnel should open the enclosure.
Do not insert or force any objects through the cooling vents of the BSR 2000.
That action could result in electrical shock or fire.
Avoid spilling fluids onto the BSR 2000. That action can cause electrical shock or
damage the router.
Avoid touching electrical wires or terminals that are not insulated unless the
BSR 2000 is disconnected from its power source. Touching electrical wires or
terminals that are not insulated could cause electrical shock.
Safety Warnings, Cautions, and Guidelines
MGBI C-5