Problem solving guide
Fault messages after a programme has been cancelled
Problem
Water intake See
Check drainage See
Service
Waterproof syst.
Service Fault F
To switch off the fault message, switch the washer-dryer off with the button.
80
Possible cause and remedy
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
Check whether the maximum delivery height of
1 m has been exceeded.
The water protection system has reacted.
Turn off the tap.
Call Miele.
There is a fault.
Restart the programme.
If the fault message appears again, contact Miele.