Table of Contents
Advertisement
Settings
Display brightness
There are seven different display
brightness settings.
The brightness will change as soon as a
different setting is chosen.
Display switch-off status
To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
Options
– On
The display will go out after
10 minutes.
– On (not in current programme)
(Factory default setting)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
– Off
The display will remain on.
112
Display maximum load
After a programme is selected the
maximum load appears in the display
for a short time. You can switch this
off.
Factory default setting: Display
maximum load is switched on.
Display programme name
The name of the selected programme
is shown briefly in the display. You can
choose whether the programme name
is displayed or not.
Factory default setting: Display
programme name is switched off.
Memory
The washer-dryer will save the last
settings selected for a programme
(temperature, spin speed and some of
the options) after the programme has
started.
The next time the programme is chosen
these saved settings will appear in the
display.
Factory default setting: the memory
function is switched off.
Hide quick links:
Advertisement
Table of Contents
