Table of Contents
Advertisement
Changing a pro-
gramme once it
has started
Cancelling the
current pro-
gramme
Reselecting a can-
celled programme
Adding laundry
Adding laundry
during ongoing
Delay start period
Changing the programme sequence
Tumble dryer
You cannot change to another programme once a programme has
started (this prevents unintentional alterations). You will need to can-
cel the current programme before you can select a new one.
Risk of fire due to incorrect use and operation.
The laundry can burn and destroy the tumble dryer and the sur-
roundings.
See the section on "Warning and safety" for further information.
Touch the Start/Stop sensor control.
The following message appears in the display:
Yes
Touch the
sensor control to cancel the current programme.
Risk of burns by touching hot laundry or the tumble dryer drum.
Touching the hot laundry or the tumble dryer drum may cause
burns.
Let the laundry cool down and remove it carefully.
Opening the door of the tumble dryer during the programme se-
quence will cancel the current programme.
Door opening status
If the
the supervisor level, the current programme will be interrupted when
the door is opened. In the case of an interruption, the tumble dryer
will remain in the current programme.
The interrupted programme will be continued when the door is
Start/Stop
closed and the
Open and close the door.
Select and start a new programme.
Open the door.
Risk of burns by touching hot laundry in the tumble dryer drum.
The laundry and the tumble dryer drum are still hot and can cause
burns if they are touched.
Let the laundry cool down and remove it carefully.
Add the laundry.
Close the door.
Start the programme.
You can open the door to add or remove laundry.
- All programme settings will be saved.
- You can change the drying level, if required.
Open the door.
Add or remove laundry.
Interrupt programme
/
sensor control is pressed.
Cancel programme?
function is selected in
55
Advertisement
Table of Contents
