Special Features In The Programme Sequence - Miele WTZH 730 WPM Operating Instructions Manual

Hide thumbs Also See for WTZH 730 WPM:
Table of Contents

Advertisement

Washing
 = low water level
 = medium water level
 = high water level
= intensive rhythm
= normal rhythm
= sensitive rhythm
= ultra sensitive rhythm
= handwash rhythm
= carried out
= not carried out
This washer-dryer has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Options are
not taken into account.
The washer-dryer's display continually
shows which stage of the programme
has been reached.
44
Special features in the programme
sequence
Anti-crease
At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens and Silks
programme.
The drum door can be opened at any
time during the anti-crease phase.
1)
If a temperature of 60°C or higher is
selected, and with  and ,
two rinses are carried out. If a
temperature of less than 60°C is
selected, three rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
(no spinning) has been
0 rpm
selected.
3)
Pre-rinse: a pre-rinse is automatically
carried out to remove dust.
4)
Run-up to spin: a run-up to spin is
carried out before the wash process
begins to deflate the pillows.
5)
Extra rinse: an extra rinse is carried
out when the Water plus option is
selected, if an extra rinse has been
activated as described in "Settings".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents