Table of Contents
Advertisement
Washing
Spinning
Final spin speed
Rinse-spin
Anti-crease
42
After the programme has started, the selected delay start period can
only be changed or cancelled by interrupting the programme.
The programme can be started immediately at any time.
Start immediately
Touch the
Special features in the programme sequence
When a programme is selected, the maximum spin speed for this
wash programme is shown in the display in the pre-start menu.
You can reduce the final spin speed.
Depending on the programme, it may also be possible to increase the
speed. The setting options are displayed when you tap the spin
speed.
There is a spin cycle after the main wash and between the rinse
cycles. A reduction in the final spin speed will also reduce the interim
spin speed as appropriate.
At the end of the programme, the drum continues to turn at intervals
for up to 30 minutes to help prevent creasing.
The machine cannot be opened until the programme has ended.
Anti-crease is programme-dependent and the option can be
switched on or off in the supervisor level.
selection area.
Advertisement
Table of Contents
