Local Control Panel Operation - Danfoss FC 301 Operating Manual

Commissioning

5.2 Local Control Panel Operation

5 5
Key
1
2 Status
3 Quick Menu
4 Back
5 Green indicator
light.
6 Yellow indicator
light.
7 Red indicator
light.
8 [Hand On]
9 Off
10 [Auto On]
11 Reset
12 OK
13 Navigation Keys
14 Info
15 Cancel
16 Main Menu
17 Alarm Log
Illustration 5.1 Graphic Local Control Panel (GLCP)
18
®
VLT AutomationDrive FC 301/302
Status
799 RPM
1
Auto Remote Ramping
2
Status
3
4
On
5
Warn.
6
Alarm
7
Hand
On
8
Function
The information shown in the display area depends on the selected function or menu (in this case Quick Menu
Q3-13 Display Settings).
Shows operational information.
Allows access to programming parameters for initial set-up instructions and many detailed application instructions.
Reverts to the previous step or list in the menu structure.
Power on.
The indicator light comes on when a warning is active. A text appears in the display area identifying the problem.
A fault condition causes the indicator light to flash, and an alarm text is shown.
Puts the frequency converter in local control mode, so that it responds to the LCP.
•
An external stop signal by control input or serial communication overrides the local [Hand On].
Stops the motor but does not remove power to the frequency converter.
Puts the system in remote operational mode.
•
Responds to an external start command by control terminals or serial communication.
Resets the frequency converter manually after a fault has been cleared.
Press to access parameter groups or to enable a selection.
Press the navigation keys to move between items in the menu.
Press for a definition of the function being shown.
Cancels the last change or command as long as the display mode is not changed.
Allows access to all programming parameters.
Shows a list of current warnings, the last 10 alarms, and the maintenance log.
Danfoss A/S © 05/2018 All rights reserved.
1(1)
7.83 A 36.4 kW
0.000
53.2 %
Quick Main Alarm
Menu Menu Log
OK
Auto
Reset
O
On
9 10 11
17
16
15
14
13
12
MG33AT02