Table of Contents
Advertisement
6.4 Testing O e a
Te
Set the appropriate threshold level and pulse width before testing, and then press "T" to start measure.
(Hint: threshold level, pulse width, and measure distances are tightly related. Shorter distance should
choose the smaller pulse width, while longer distance should choose the bigger pulse width. The pulse
width needs to be set according to practical situation. )
Reading data from PC
There will be a USB logo displaying in the screen when a USB device connect to the instrument.Then
you may read the data by using the simulating software.
Operation of visual fault locator
In the main interface, press and DOW N keys > 2S to switch between---On , 2Hz output, Off.
AC adapter
a e
There will be an AC adapter logo displaying in the screen and battery logo disappears when the AC
adapter is connected with the instrument. In the reverse case,a battery logo will be displaying in the
screen and AC adaptor logo disappears.
Advertisement
Table of Contents
