Maintenance; Maintenance Schedule; Clean The Appliance; Clean The Glass - Bellfires Smart Bell 65 MF User Manual

5 5

Maintenance

5.1

Maintenance schedule

Task

Clean the appliance

Maintenance by your fitter
5.2 Clean the appliance
1.
2.
3.
4.
5.3

Clean the glass

1.
2.
Smart Bell 65-55
Caution:
Clean the glass when it is dirty. If the glass is not cleaned when it is dirty the
glass can become permanently dull.
Note:
• Use gloves to avoid visible fingerprints on the glass.
• If you use a vacuum lifter to remove the glass, make sure that the suction
pads are clean and dry. If the suction pads are not clean or dry, the suction
pads can leave a mark.
Make sure that the appliance is off and is cooled down.
Remove any dust from the operating unit. Use a vacuum cleaner.
Do a check on the glass for damage. If you see damage, replace the glass. Do not
use the appliance before the glass is replaced. For disposal of the glass, refer to
Clean the glass.
a) If the inner side is dirty, remove the glass. Refer to the Installation and
maintenance manual.
b) Clean the glass, refer to
c) Install the glass. Refer to the Installation and maintenance manual.
Clean the glass with a soft cloth, a sponge or paper. Use glass cleaner or ceramic
hob cleaner.
Make sure that the glass is dry. Water droplets can leave a mark on the glass.
Frequency
Daily
Yearly
5.3
.
Maintenance
Procedure
5.2
Refer to section
Refer to your fitter/dealer
3.3
.
23