Set The Program Mode Settings; Set The Countdown Timer Mode - Bellfires Smart Bell 65 MF User Manual

4 4 .4.2

Set the program mode settings

Default settings:
• Temperature when the appliance starts: 21 °C (70 °F).
• Temperature when the appliance stops: "--" (pilot light only).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Select the hour and minutes for the stop time of the appliance.
11. If you do not want program 2 active in program mode, wait for the blinking to stop to
12. If you want program 2 active, push the program mode button and set the on and off
13. Wait for the blinking to stop to save the settings.
4.4.3

Set the countdown timer mode

Smart Bell 65-55
Note:
• The temperature for the starting time in the program mode is the same as
the temperature that is set in the temperature mode.
• The set temperatures for the starting and stopping times of the appliance
are the same for each day.
• When the batteries are removed from the remote control, the set
temperatures, days and times are reset.
Push and hold the program mode button until the
program mode flashes and 'ON' and the set temperature
appears.
Tap the program mode button to continue. The display
of the remote control shows 'OFF' and the temperature
flashes.
Use the up and down buttons to set the temperature for the stopping time of the
appliance.
Push the program mode button to store the temperature and to continue.
Use the up and down buttons to set the day(s) the
program is active.
Note:
'ALL' (every day), 'SA:SU' (saterday and
sunday), '1' (monday), '2' (tuesday), '3'
(wednesday), '4' (thursday), '5' (friday), '6'
(saterday) or '7' (sunday).
Push the program mode button to store the day.
Use the up and down buttons to select the hour on
which the appliance starts up.
Push the program mode button to store the hour.
Select the minutes on which the appliance starts up and
push the program mode button.
save the settings.
time for program 2.
Note: The maximum period of time you can set for this mode is 9 hours and
50 minutes.
Operation
ON
OFF
1 2
ON
1
21