Table of Contents
Advertisement
Fault Relay Alarm
Power Failure: When the check box is marked, the Fault LED will light
if the power source fails.
Port Link Down/Broken: When the check box is marked, the Fault
LED will light if a port link goes down.
SNTP Configuration
The SNTP allows you to synchronize switch clocks.
1.
SNTP Client: Enables or disables the SNTP function.
2.
Daylight Saving Time: Enables or disables daylight saving time. When
this function is enabled, the time period must be entered.
3.
UTC Time zone: Sets the local time zone.
Manual Documentation Number: EIR618-2SFP-T_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Fault Relay Alarm interface
61
Advertisement
Table of Contents
