Port Commands Set - B&B Electronics EIR618-2SFP-T User Manual

Port Commands Set

Commands
interface fastEthernet
[Portid]
duplex
[full | half]
speed
[10|100|1000|auto]
no flowcontrol
security enable
no security
bandwidth type all
bandwidth type
broadcast-multicast-floo
ded-unicast
30
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Level Description
Choose the port for
G
modification.
Use the duplex
I
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
Use the speed
I
configuration
command to specify
the speed mode of
operation for Fast
Ethernet., the speed
can't be set to 1000 if
the port isn't a giga
port..
Disable flow control of
I
interface
Enable security of
I
interface
Disable security of
I
interface
Set interface ingress
I
limit frame type to
"accept all frame"
Set interface ingress
I
limit frame type to
"accept broadcast,
Manual Documentation Number: EIR618-2SFP-T_5107m
Example
switch(config)#interface
fastEthernet 2
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
switch(config-if)#no flowcontrol
switch(config)#interface
fastEthernet 2
switch(config-if)#security enable
switch(config)#interface
fastEthernet 2
switch(config-if)#no security
switch(config)#interface
fastEthernet 2
switch(config-if)#bandwidth type
all
switch(config)#interface
fastEthernet 2
switch(config-if)#bandwidth type