802.1X Commands Set - B&B Electronics EIR618-2SFP-T User Manual

802.1x Commands Set

Commands
8021x enable
8021x system radiusip
[IP address]
8021x system serverport
[port ID]
8021x system
accountport
[port ID]
8021x system sharekey
[ID]
8021x system nasid
[words]
Manual Documentation Number: EIR618-2SFP-T_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
monitor function
Level Description
Use the 802.1x global
G
configuration
command to enable
802.1x protocols.
Use the 802.1x system
G
radius IP global
configuration
command to change
the radius server IP.
Use the 802.1x system
G
server port global
configuration
command to change
the radius server port
Use the 802.1x system
G
account port global
configuration
command to change
the accounting port
Use the 802.1x system
G
share key global
configuration
command to change
the shared key value.
Use the 802.1x system
G
nasid global
configuration
command to change
fastEthernet 2
switch(config-if)#no monitor
Example
switch(config)# 8021x enable
switch(config)# 8021x system
radiusip 192.168.1.1
switch(config)# 8021x system
serverport 1815
switch(config)# 8021x system
accountport 1816
switch(config)# 8021x system
sharekey 123456
switch(config)# 8021x system
nasid test1
43