Installing The Usb Drivers; Python Installation; Usb Driver Installation - Screen 1 (Windows 7 Os Only) - Texas Instruments AFE4403 User Manual

Software Installation
3.3

Installing the USB Drivers

The communication interface between the AFE4403EVM board and PC is through the USB, using the
CDC profile. A one-time installation of the USB driver is required for the communication between the
AFE4403EVM and PC application.
Following the steps below ensures proper installation of the USB drivers:
1. Plugin the USB-to-mini USB cable to J4 of AFE4403EVM and the other end to the USB port on the
PC.
2. Win XP OS starts up the New Hardware Wizard to enable the user to install the USB driver for the new
hardware. The Windows 7 OS attempts to find the driver for the new hardware found automatically and
if the driver is not found, there is no pop-up message to indicate that the driver installation failed. In the
Windows 7 OS, click on Device Manager, right click on MSP430-USB example under Other devices
and click on Update Driver Software as shown in
XP OS.
Figure 8. USB Driver Installation - Screen 1 (Windows 7 OS only)
3. Select the Browse my computer for driver software option
10
AFE4403 Development Guide
Figure 7. Python Installation
Figure
Copyright © 2014, Texas Instruments Incorporated
8. This step is not required for the Windows
SLAU572B – June 2014 – Revised July 2014
Submit Documentation Feedback
www.ti.com