Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments AM571 Series
Summary of Contents for Texas Instruments AM571 Series
- Page 1 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware User's Guide Literature Number: SPRUI97A May 2017...
-
Page 2: Table Of Contents
Video Input and Output ........................Camera ........................HDMI ..............................................Industrial Interfaces ........................10.1 Profibus ........................10.2 DCAN ........................10.3 RS-485 ........................User Interfaces Table of Contents SPRUI97A – May 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 3 AM5718 pin N21 must be connected to 1.8V, as it is VDDS18V_DDR1 and not N/C ............. A.19 VOUT1 is used at 3.3V, which violates erratum i920 .......................... Revision History SPRUI97A – May 2017 Contents Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
- Page 4 USB Port 2 USB2.1 Micro-AB Connector - J45 .................... CAN Header Connector - J38 ..................Profibus DB9F Connector - J14 ..................RS-485 Header Connector - J39 ..................... PCIe Connector – J52 List of Figures SPRUI97A – May 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
-
Page 5: Preface
TI Embedded Processors Wiki— Texas Instruments Embedded Processors Wiki. Established to help developers get started with Embedded Processors from Texas Instruments and to foster innovation and growth of general knowledge about the hardware and software surrounding these devices. Trademarks Sitara, E2E, Code Composer Studio, SmartReflex are trademarks of Texas Instruments. -
Page 6: Introduction
The AM571x IDK contains embedded emulation circuitry to quickly enable developers to begin using this IDK. The embedded emulation logic allows emulation and debug using standard development tools such as the Texas Instruments Code Composer Studio™ integrated development environment (IDE) by simply connecting a USB cable to a Windows -based computer. -
Page 7: System View
AM571x IDK EVM with the optional LCD display assembly attached is provided in Figure Figure 1. AM571x IDK EVM - Top View SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 8: Am571X Idk Evm - Bottom View
Introduction www.ti.com Figure 2. AM571x IDK EVM - Bottom View AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 9: Am571X Idk Evm With Camera Board Installed
Introduction www.ti.com Figure 3. AM571x IDK EVM with Camera Board Installed SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 10: Am571X Idk Evm With Lcd Display Assembly Attached
Introduction www.ti.com Figure 4. AM571x IDK EVM with LCD Display Assembly Attached AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 11: Functional Description
Touch Panel Serializer ICSS Header ICSS1 ICSS1 prx_mii0/1_txen/rxdv, RJ45 RJ45 prx_edio_data_out + sync TLK105L TLK105L ICSS0 ICSS0 RJ45 RJ45 SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 12: Processor
The TPS3808 can detect the main supply voltage dropping and then trigger the PMIC to execute a controlled shut-down that meets the requirements in the AM571x Sitara Processors Silicon Revision 2.0 Data Manual (SPRS957). AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 13: Power Supplies
LDO1 that is used for the SDIO interface that operates at either 1.8V or 3.3V depending on the operating mode. SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 14: Other Power Supplies
R1Z-3.305HP Isolated DC-DC Supply: This converter generates 5.0V isolated from the primary 3.3V DC supply on board for the DCAN interface. AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 15: Configuration/Setup
Table 2. I2C2/AM571X_HDMI_DDC I2C Slave Device Address(es) HDMI Bridge, U46 — CDCE913 Ethernet Clock Generator B, U25 0x65 SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 16: Seeprom Header
XDS100V2 emulation. The AM571x IDK EVM does not support emulation trace capability. AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 17: Memories Supported
Kingston EMMC16G-S100 and the Micron MTFC16GAKAECN-2M WT. These are 16GB eMMC NAND Flash memories that are standard version 5.0 compliant. SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 18: Ethernet Ports
The resets for the transceivers are driven low coincident with the PORz reset to the AM5718 processor. A 25-MHz clock is provided into each of the KSZ9031RN Gigabit transceivers. AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 19: Usb Ports
This in turn allows the console port to the PC to remain active to allow logging from the serial port immediately as the AM5718 device boots. It also provides faster re-connect for the XDS100V2 JTAG emulator. SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 20: Pcie
NOTE: Installing a shunt on header J51 that shorts these pins together enables 4-port Ethernet mode. Removing the shunt from these pins enables 6-port Ethernet mode. AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 21: Industrial Interfaces
IND_I2C bus. The eight LED driver outputs are also driven to the I/O Expansion Header, J37. All the LEDs are green in color. SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 22: Pin Use Description
(PU) or pull-down (PD) resistor attached or the recommended internal pull-up or pull-down resistor defined in the pinmux file provided for the AM571x IDK EVM. AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware SPRUI97A – May 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 23: Gpio Pin Mapping
UART1_RXD GPIO7_22 GPIO_USB2_VBUS_DET Input EXT PU UART1_CTSN GPIO7_24 AM57XX_INDETHER_LED3_YEL Output EXT PD UART1_RTSN GPIO7_25 AM57XX_INDETHER_LED3_GRN Output EXT PD SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 24: Board Connectors
AM57XX_GPMC_AD10 AM571X_VIN2A_FLD0 AM57XX_GPMC_AD3 PR1_MII_MR0_CLK AM57XX_GPMC_AD11 AM571X_VIN2A_HSYNC0 DGND — DGND — CAN1_RXDF — AM57XX_GPMC_AD12 AM571X_VIN2A_VSYNC0 CAN1_TXDF — AM57XX_GPMC_AD13 AM57XX_PR1_UART0_RXD AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 25 GPMC_WAIT0 — AM57XX_GPMC_AD5 PR1_MII0_RXD1 AM571X_PRU1ETH1_TXD1 AM57XX_PRU2ETH0_CRS AM57XX_GPMC_AD6 PR1_MII0_RXD0 AM571X_PRU1ETH1_TXD0 AM57XX_PRU2ETH0_COL AM57XX_GPMC_AD7 — GPMC_CLK — DGND — DGND — SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
-
Page 26: I/O Expansion Header Connector - J37
V12_0D INDUS_INPUT7 V12_0D DGND No Connect DRAIN0 DRAIN1 DRAIN2 DRAIN3 DRAIN4 DRAIN5 DRAIN6 DRAIN7 V5_0D V5_0D DGND DGND AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 27: Microsd Connector - J15
Table 9. Power Jack Connector - J1 Signal Name VPWRIN_JCK DGND DGND Table 10. Power Terminal Block Connector - J2 Signal Name VPWRIN_JCK DGND SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 28: Pru1Eth0 Rj45 Connector - J3
YEL LED Cathode RXLINK GRN LED Anode V3_3D GRN LED Cathode PRU1ETH1_LINKLED SHLD1 Shield AGNDFRAME_PRU1ETH1 SHLD2 Shield AGNDFRAME_PRU1ETH1 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 29: Pru2Eth0 Rj45 Connector - J6
YEL LED Cathode RXLINK GRN LED Anode V3_3D GRN LED Cathode PRU2ETH1_LINKLED SHLD1 Shield AGNDFRAME_PRU2ETH1 SHLD2 Shield AGNDFRAME_PRU2ETH1 SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 30: Pru2Eth0 Test Header Connector - J7
CAM1_WEN AM571X_VIN4B_DATA5 CAM1_GIO1 CAM_ENn CAM1_DATA5 AM571X_VIN4B_DE CAM1_FIELD AM571X_VIN4B_FLD DGND I2C_SCL IND_I2C_SCL Clock 20.000 MHz Osc Out I2C_SDA IND_I2C_SDA AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 31: Gige Rj45 Connector - J10
RT YEL Anode DGND LEFT GRN Anode DGND LEFT YEL Anode PU to PHY1_LED_LINKn SHLD1 Shield AGND_GBETH1 SHLD2 Shield AGND_GBETH1 SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 32: Lcd Module Ffc Connector - J16
Table 21. Touchscreen Controller FFC Connector - J17 Pin Name Signal Name IND_I2C_SDA IND_I2C_SCL TSC_RESETn GPIO_TOUCH_RESETn TSC_INT TOUCH_INT V3_3D DGND AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 33: Hdmi Standard A-Type Connector - J24
JTAG_EMU0 EMU1 JTAG_EMU1 SRST EMU_RSTn DGND — EMU2 No Connect EMU3 No Connect EMU4 No Connect DGND — SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 34: Jtag Usb Micro-Ab Connector - J19
Table 26. USB Port 2 USB2.1 Micro-AB Connector - J45 Pin Name Signal Name VBUS VUSB_VBUS2 USB2_CONN_DM USB2_CONN_DP USB2_ID DGND GNDUSB2 GNDUSB2 GNDUSB2 GNDUSB2 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 35: Can Header Connector - J38
VPROFI No Connect PROFIBUS_B No Connect Table 29. RS-485 Header Connector - J39 Signal Name RS485_A RS485_B DGND SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 36: Pcie Connector - J52
PU to V3_3D +3.3V V3_3D +3.3V V3_3D PERST# PCIE_PERSTn Ground DGND REFCLK+ PCIE_REFCLKP REFCLK- PCIE_REFCLKN Ground DGND HSIp(0) PCIE_PERp0 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) SPRUI97A – May 2017 Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 37: Evm Important Notice
DGND Reserved No Connect EVM Important Notice Refer to the STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES (SSZZ027). SPRUI97A – May 2017 AM571x Industrial Development Kit (IDK) Evaluation Module (EVM) Hardware Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 38: Appendix A Known Deficiencies In Am571X Idk Evm
Terminal block J53 is provided for this purpose. Test fixtures that repeatedly cycle main power on and off should have the board ground bonded to earth ground at all times during this testing. Known Deficiencies in AM571x IDK EVM SPRUI97A – May 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 39: Software Shutdown Of Pmic Not Operational
Please refer to i862 in the errata document for more information. CCS System Reset fails Warm reset and emulation reset events configured for warm reset cause the Texas Instruments Code Composer Studio™ (CCS) integrated development environment (IDE) to issue an error message. This is due to the reset erratum that requires all resets to trigger a PORz low event. -
Page 40: Phy Address Lsb For U9 And U15 Can Be Latched Incorrectly
AM571x devices per the device erratum. Operation at 3.3V may impact long-term reliability. Voltage-level translators must be used if these signals interface to circuits that require 3.3V signaling levels. Known Deficiencies in AM571x IDK EVM SPRUI97A – May 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 41: Revision History
A.15: Added subsection ....................... • Section A.16: Added subsection ....................... • Section A.17: Added subsection ....................... • Section A.18: Added subsection ....................... • Section A.19: Added subsection SPRUI97A – May 2017 Revision History Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 42 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 43 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 44 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 45 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
- Page 46 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
- Page 47 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TMDXIDK5718...
Need help?
Do you have a question about the AM571 Series and is the answer not in the manual?
Questions and answers