Getting Started - Orbit B-Hyve User Manual
Wifi sprinkler timer
Hide thumbs
Also See for B-Hyve:
- Quick start manual (64 pages) ,
- User manual (15 pages) ,
- Owner's manual (2 pages)
Table of Contents
Advertisement
Getting Started
Your B-hyve™ sprinkler timer is great for new installations or for
replacing an old sprinkler timer . Here are some basic steps to get
your timer set up and get you closer to saving water and money .
Install the timer
Choose a location on your property with a good wifi signal .
Install the B-hyve™ app on your smart device
You will need a smart device to connect the timer to wifi . After the
timer is paired, you can also use a computer to adjust your timer .
Setup your timer with the app or at the timer
Your timer works with and without wifi . It can be programmed
with your smart device or at the timer interface .
Note: If replacing a timer, it is helpful to take a photo of the wires
before you remove them from the old timer .
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the B-Hyve and is the answer not in the manual?
Questions and answers
How to open battery compartment for Orbit 57946
The document does not provide specific instructions on opening the battery compartment for the Orbit B-Hyve 57946. However, it mentions that to replace the battery, you need to lift the edge of the CR2032 coin cell battery to remove it. Do not use a screwdriver or metal object. Insert a new CR2032 battery at an angle and press to click it into place. Ensure the battery compartment is completely secured.
This answer is automatically generated
I need help to pair my system with my phone
@Felix Ignacio Garcia
To pair your Orbit B-Hyve system with your phone:
1. Put the timer into pairing mode. You will see a signal icon or the word "PAIR" on the screen.
2. Open the B-Hyve app on your phone.
3. Tap "Start Pairing" in the app.
4. The phone will detect the timer’s Wi-Fi network and connect to it.
5. The timer will then show available Wi-Fi networks.
6. Select your home Wi-Fi network and enter the password.
7. Complete setup by entering your zip code and any other required information.
Make sure your phone has Wi-Fi enabled and is near the timer.
This answer is automatically generated