Orbit B-hyve Owner's Manual

FLOOD
SENSOR
Retrieval Cord
BACK
MAC ID
Pairing
Reset
Button
XXXXXXXXXXXX
Water Sensors
Need Help?
If you encounter a problem, please use the following resources
before returning your B-hyve to the store.
Scan the QR Code for access to updated user manuals in
additional languages, videos, and more.
call us
1-801-299-5555
support@orbitbhyve.com
Instructions available in
additional languages online.
QUICK SET UP GUIDE
1) Requires a B-hyve Gen 2 Hub.
2)Remove Pull Tab from sensor.
3)Add new device in B-hyve app.
KEEP FOR YOUR RECORDS
FRONT
LED
Status Light
INSIDE
CR2032
Battery Location
CR2032 3V
text us
801-905-8220
email us
1) Open the B-hyve™ App
Log into your B-hyve account and tap "My B-hyve".
Go to "devices" then "add device". Tap "Flood
Sensor" and the app will walk you through the rest of
the process.
For new users, search apps for "B-hyve" and
download the free Android or iOS app. Create
an account to begin setup.
2) Power and Pair Sensor
Remove the pull tab to activate the battery, your
sensor is now in pairing mode.
If at any time you need to re-pair, quickly press
the on the back of the sensor 5 times.
Sensors include one Lithium CR2032 battery.
Annual battery replacement is recommended for
optimal performance. See the "Replacing the Battery"
section for instructions.
3) Select Sensor Location
Place the sensor in an indoor location within range of
your hub. Range is approximately 300 ft, walls and
other interference can reduce this range. Position the
retrieval cord for easy extraction when placing a sensor
beneath heavy objects.
If using as a water sensor:
• Place the sensor flat on the floor in the area you wish
to monitor.
• Ensure that the flood sensor is positioned with its flat
surface faced down.
If using as a heat/cold sensor:
• Place in the location where you wish to detect
changes in temperatures.
• Avoid areas where inconsistent temperatures are
common. (near vents, exhausts, etc.)
The sensor communicates with the hub via
Bluetooth™; the range between the sensor and
hub will vary depending on the number of walls
and types of obstacles the signal needs to travel
through.
Avoid areas where the signal must travel
through dirt or thick steel barriers.
If water is detected or there is a temperature
fluctuation, a beep will play and a notification
will be displayed on your phone. Once the
problem is fixed, just reset your sensor and use
it again.
4) Complete Setup
Continue to follow the instruction within the app to
complete the setup process.
More information
on back