Table of Contents
Using the Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Timer LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Remember, you can set your timer up with
the app . But, if you don't have wifi or just
want to make an adjustment while you are
outside, you can do it at the timer . Timer
changes will be reflected in the app, and
app changes will be reflected at the timer .
For more detailed instructions or
troubleshooting information, visit
bhyve.orbitonline.com
Also, the app has help screens and
video to assist you with wifi connections,
programming, smart watering and other
general questions you may have .
If the app and the website don't have what
you're looking for, please call our technical
support line .
Help
1-800-488-6156 or 1-801-299-5555
www . o rbitonline . c om
bhyve . o rbitonline . c om
Before returning this sprinkler timer
to the store, contact Orbit® Technical
Service at: 1-800-488-6156, 1-801-299-5555
3
Need help?
Do you have a question about the B-Hyve and is the answer not in the manual?
Questions and answers
How to open battery compartment for Orbit 57946
The document does not provide specific instructions on opening the battery compartment for the Orbit B-Hyve 57946. However, it mentions that to replace the battery, you need to lift the edge of the CR2032 coin cell battery to remove it. Do not use a screwdriver or metal object. Insert a new CR2032 battery at an angle and press to click it into place. Ensure the battery compartment is completely secured.
This answer is automatically generated
I need help to pair my system with my phone
@Felix Ignacio Garcia
To pair your Orbit B-Hyve system with your phone:
1. Put the timer into pairing mode. You will see a signal icon or the word "PAIR" on the screen.
2. Open the B-Hyve app on your phone.
3. Tap "Start Pairing" in the app.
4. The phone will detect the timer’s Wi-Fi network and connect to it.
5. The timer will then show available Wi-Fi networks.
6. Select your home Wi-Fi network and enter the password.
7. Complete setup by entering your zip code and any other required information.
Make sure your phone has Wi-Fi enabled and is near the timer.
This answer is automatically generated