Programming The Timer - Orbit B-Hyve User Manual

Programming the Timer–AUTO and OFF
The timer should be in AUTO during the
irrigation season and OFF in the winter
months or the non-irrigation months .
Turn the dial to the AUTO position and
press the dial or just leave it there to keep
it in AUTO .
If the dial selection is left in any position
other than OFF, it will revert back to
AUTO after approximately 20 seconds .
To turn your timer OFF, turn the dial to
OFF and press the dial or just leave it in
the OFF position .
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app .
17