Orbit B-Hyve User Manual page 19

Programming the Timer–START TIME
This is the time that the first zone will
begin watering . Only one start time is
needed to run each station in the program .
Turn the dial until the selection box is on
START TIME and press the dial .
Turn the dial to the desired start hour and
press the dial to confirm the selection .
Turn the dial to the desired start minute
and press the dial to confirm the selection .
Note: only one start time is needed to run
all of your zones and that start time will
show up as 1st . If additional start times are
needed, repeat this process . Additional
start times are helpful to avoid run off and
allow time for the soil to absorb the water .
Press PROG ABC to set up start times for
additional programs .
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app .
19