Orbit B-Hyve User Manual page 18

Programming the Timer–DATE/TIME
If you are connected to wifi, the time
and date will automatically be sent to the
sprinkler timer .
To set the date and time manually, turn the
dial until the selection box is on DATE/
TIME and press the dial .
Set the date by turning the dial until the
correct year, month and day are shown and
press the dial to confirm each selection .
When setting the time, press the dial when
the right time is set . Be careful to make
sure that the am/pm selection is correct .
18
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app .