Universal Intercom Pairing; Two-Way Universal Intercom - Sena SF4 User Manual

11.1 Universal Intercom Pairing (SF2, SF4)
The SF2/SF4 can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SF2/SF4 with only
one non-Sena Bluetooth headset so if you pair with a different non-
Sena Bluetooth headset, the previous pairing will be removed.
1. Turn on the SF2/SF4 and a non-Sena Bluetooth headset that you
want to pair with.
2. Press and hold the Center Button for 10 seconds to enter the
configuration menu. Tap the (+) Button or the (-) Button until
you hear a voice prompt, "Universal intercom pairing". Tap
the Center Button to enter into Universal Intercom Pairing mode.
Please refer to section 14.8, "Universal Intercom Pairing (SF2,
SF4)" for more details.
3. Perform the operation required for handsfree pairing on the
non-Sena Bluetooth headset (refer to the User's Manual for the
headsets you want to use). The SF2/SF4 will automatically pair
with a non-Sena Bluetooth headset when each are in pairing
mode.
11.2 Two-way Universal Intercom (SF2, SF4)
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the
Center Button to begin an intercom conversation with the first intercom
friend, double tap with the second intercom friend, and triple tap with
the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by using
the operation to end a call (refer to the User's Manual for the headsets
for voice dialer, redialing, and ending a call).
SF Series
33