Universal Intercom Pairing - Sena 10UPAD User Manual

10Upad
1. If a non-Sena headset does not support a multipoint connection,
it cannot use a phone call connection while using the Universal
Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint
connection.
3. If non-Sena headset (already paired as Universal Intercom with
Sena) is turned on, then the multipoint connection is automatically
deactivated. And the non-Sena headset is automatically
connected to the Sena headset as a Universal Intercom. So you
cannot use multipoint connection devices such as GPS, while a
non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the
non-Sena headset first, then try to connect to multipoint device
manually from the device screen or simply reboot the device so
that it automatically connects to the Sena headset.
32

11.1 Universal Intercom Pairing

The 10Upad can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the 10Upad with only
one non-Sena Bluetooth headset so if you pair with a different non-
Sena Bluetooth headset, the previous pairing will be removed.
1. Turn on the 10Upad and a non-Sena Bluetooth headset that you
want to pair with.
2. Press and hold the Center Button for 10 seconds to enter the
configuration menu. Tap the (+) Button or the (-) Button until you
hear a voice prompt, "Universal intercom pairing". Tap the
Center Button to enter into Universal Intercom Pairing mode and
the blue LED will flash rapidly and you will hear multiple beeps.
Please refer to section 14.16, "Universal Intercom Pairing" for
more details.
3. Perform the operation required for handsfree pairing on the
non-Sena Bluetooth headset (refer to the User's Manual for the
headsets you want to use). The 10Upad will automatically pair
with a non-Sena Bluetooth headset when each are in pairing
mode.