Universal Intercom; Universal Intercom Pairing - Sena 10U Manual

10U

11 UNIVERSAL INTERCOM

You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they support
the Bluetooth Hands-Free Profile (HFP). The working distance may differ
depending on the performance of Bluetooth headset that it is connected
to. In general, it is shorter than normal intercom distance since it uses
the Bluetooth Hands-Free Profile. The Universal Intercom affects both
the phone call connection and the multipoint connection (mostly used
for GPS connections for riders). You cannot use a multipoint connection
device while you are using the Universal Intercom in case as below.
1. If a non-Sena headset does not support a multipoint connection,
it cannot use a phone call connection while using the Universal
Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint
connection.
3. If non-Sena headset (already paired as Universal Intercom with
Sena) is turned on, then the multipoint connection is automatically
deactivated. And the non-Sena headset is automatically connected to
the Sena headset as a Universal Intercom. So you cannot use multipoint
connection device such as GPS, while a non-Sena headset is turned on.
46
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the non-Sena
headset first, then try to connect to multipoint device manually from
the device screen or simply reboot the device so that it automatically
connects to the Sena headset.

11.1 Universal Intercom Pairing

The 10U can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the 10U with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the 10U and a non-Sena Bluetooth headset that you want to
pair with.
2. Press the Center Button for 10 seconds to enter the configuration
menu. Tap the (+) Button or the (–) Button until you hear a voice
prompt saying, "Universal intercom pairing". Tap the Center Button
to enter into Universal Intercom Pairing mode and the blue LED will
flash rapidly and you will hear multiple beeps. Please refer to section
14.1, "Headset Configuration Setting" for more details.