Headset Configuration Settings - Sena SF4 User Manual

14 HEADSET CONFIGURATION SETTINGS

You can set the configuration of the SF Series by the voice menu
instruction described below.
1. To enter into voice configuration menu, press and hold the Center
Button for 10 seconds until you hear high-toned double beeps.
You will also hear a voice prompt, "Configuration menu".
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by
tapping the Center Button.
4. If no button is pressed within 10 seconds, the SF Series will exit
the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, tap the (+)
Button or the (-) Button until you hear a voice prompt, "Exit
configuration", and tap the Center Button.
The voice prompt for each menu item is as below:
(1) Phone pairing
(2) Second mobile phone pairing
(3) GPS pairing
(4) Phone selective pairing
(5) Media selective pairing
SF Series
(6) Delete all pairings
(7) Remote control pairing
(8) Universal intercom pairing
(9) Factory reset
(10) Exit configuration
Phone pairing
Second mobile phone pairing
GPS pairing
Phone selective pairing
Media selective pairing
Delete all pairings
Remote control pairing
Universal intercom pairing
Factory reset
Exit configuration
41