Universal Intercom Pairing; Two-Way Universal Intercom - Sena 10S User Manual

Motorcycle bluetooth communication system

Hide thumbs Also See for 10S:

Table of Contents

10S

11.1 Universal Intercom Pairing

The 10S can be paired with non-Sena Bluetooth headsets for Bluetooth

intercom conversation. You can pair the 10S with only one non-Sena

Bluetooth headset so if you pair with a different non-Sena Bluetooth

headset, the previous pairing will be removed.

1. Turn on the 10S and a non-Sena Bluetooth headset that you want

to pair with.

2. Press the Jog Dial for 10 seconds to enter the configuration menu.

Rotate the Jog Dial until you hear a voice prompt, "Universal

intercom pairing". Tap the Phone Button to enter into Universal

Intercom Pairing mode and the blue LED will flash rapidly and you

will hear multiple beeps.

3. Perform the operation required for handsfree pairing on the non-

Sena Bluetooth headset (refer to the User's Guide for the headsets

you want to use). The 10S will automatically pair with a non-Sena

Bluetooth headset when each are in pairing mode.

You can initiate the Universal Intercom connection with non-Sena

Bluetooth headsets using the same intercom connection method as

you would between other Sena headsets. You may single tap the Jog

Dial to begin an intercom conversation with the first intercom friend,

double tap with the second intercom friend, and triple tap with the

third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom

connection, by activating the voice dialer or using the redialing

operation. You may also disconnect the existing connection by using

the operation to end a call (refer to the User's Guide of the headsets

for voice dialer, redialing, and ending a call).

Table of Contents