Appendix C: Power Optimizer Mechanical Specifications - SolarEdge SE3000US Installation Manual

Appendix C
Power Optimizer Mechanical
Specifications
About This Appendix
This appendix presents the mechanical specifications for the SolarEdge power
optimizers.
Use 5/16" screws and washers to secure the power optimizer units to the racking.
NOTE:
SolarEdge does not provide the screws, nuts or washers because the required
sizes and lengths vary for different racks.
CAUTION:
Before installing directly on the module or module frame, first consult the module
manufacturer for information about the proper positioning and its impact on the
module warranty.
Avant d'installer directement sur le module ou sur le cadre du module, consultez
d'abord le fabricant pour information sur la meilleure manière de la positionner et
son impact sur la garantie du module.

Mark all mounting hole locations.

Each power optimizer must be attached to the rack using both mounting
holes.

Drill the holes.
CAUTION:
Do not drill through the power optimizer or through the mounting holes. The strong
vibrations created by the drill can damage the power optimizer.
Ne pas percer à travers la optimiseur de puissance ou ses trous de fixation. Les
vibrations qui en résulteraient peuvent endommager la optimiseur de puissance.
Power Optimizer Mechanical Specifications
SolarEdge Installation Guide – MAN-01-00002-1.6
115