Table of Contents
Advertisement
Attaching images to an Email
Follow steps 1 – 4 from Composing and Sending Email
For Android:
1.
Select
to choose the image
(NOTE: The bottom left lets the user take a photo with the camera; bottom right lets the user choose from
existing photos
2. Once a photo is selected, there is an option to rotate as well as changing the pixel size.
3. Select the check mark at the top right corner of the app to attach the photo to the email
Hibernation Mode:
As a default setting, the Sat-Fi2 will go into hibernation mode after 15 minutes of no activity. During hibernation, the Sat-Fi2 will power off the satellite modem to increase battery life.
The hibernation timer can be configured from the settings menu in the app or web console.
When the Sat-Fi2 is in hibernation mode, the power LED does a dimming blink in orange and green colors.
To wake up the Sat-Fi2 from hibernation mode, access the app and a notification will be displayed showing that the Sat-Fi2 is waking up from hibernation. You will also see the green lights scrolling through the Sat-Fi2 LED's. Additionally, pressing the
power button for 7 seconds will start the power off sequence.
NOTE: To initiate S.O.S. while in hibernation mode, press and hold down the S.O.S. button for 3 seconds on the device. This will wake up the device and initiate S.O.S. once a connection has been established.
Globalstar Sat-Fi2 User Guide
For iPhone:
1. Select Attach Image
2. Tap on Select a Photo. The photos can be selected from the camera or from the phone's Photo Library
3. If needed, adjust the size. Select resize & Compress
4. Image will be attached to the email
Page 19
Advertisement
Table of Contents
