Best Practice - Globalstar Sat-Fi 2 User Manual

Step 6 Test Sat-Fi2 Configuration and Connection
Perform the following to make a satellite call, send a text message, receive a call or browse and confirm the Sat-Fi2 is
configured and operational:
1. Verify the following:
- The Sat-Fi2 is outside with 360 clear view of the sky with no obstructions (buildings, trees, etc.)
The Sat-Fi2 is facing up – logo/power button facing up
-
- The Sat-Fi2 co-located antenna is fully extended in the upright position and powered on
2. Verify the and the are displayed on the Sat-Fi2 app indicating the Sat-Fi2 has a good satellite
connection.
3. Select the Phone icon
4. On the telephone key pad either:
- Enter a telephone number
- Select a contact
5. Select the phone icon to place the call
6. Within a few seconds you will hear a dial tone and be connected
7. Select to disconnect/hang-up
8. The Sat-Fi2 is now configured and operational
Globalstar Sat-Fi2 User Guide
Best Practice Uses

The Sat-Fi2 WILL NOT work indoors and needs to be outside
(Indoor use will require a Remote Antenna and Mobile
Docking Station – Sold Separately)

The Sat-Fi2 co-located antenna needs to be fully extended in
the upright position

Power On the Sat-Fi2 prior to use – The Sat-Fi2 can take up
to 5 minutes to boot up and acquire a GPS fix

For optimal performance:
o
The Sat-Fi2 needs a clear 360° view of the sky with
no obstructions (buildings, trees, etc.)
o
The Sat-Fi2 should be placed on a flat surface with the Power Button and Sat-Fi2 Logo facing up
towards the sky

Ensure all users download and install the Sat-Fi2 App prior to leaving Internet/Cellular service

Before making a voice call or sending a text message, ensure
the Sat-Fi2 App, indicating that the Sat-Fi2 has a good satellite connection
and are displayed on the Status Bar of
Page 5