Advertisement
User
Step
Procedure
7
Remove the Ethernet/USB box.
Remove two screws from the BOX base.
Pull the box forward and slide to the RIGHT then OUT.
Doing this will release the box from the PCB board (Ethernet/ USB Connection )
directly behind the box.
8
Remove the FAN BOX and BRACKET as one piece
9
Remove 2 screws from the Fan Bracket located at the base.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
HDP8500 Printhead Replacement Guide L001638 rev 1.1
7
Advertisement
