Appendix D: Interface
This appendix provides detailed specifications for the printer's standard serial
interface.
13
25
Pins and Signal Names
Pin
Signal
Direction
No.
Name
1
FG
—
2
TXD
OUT
3
RXD
IN
4
RTS
OUT
5
N.C.
6
DSR
IN
Frame ground
Transmission data
Receive data
STAR Mode
When Memory Switch 4-D = 0: Same as DTR signal
When Memory Switch 4-D = 1: Always SPACE
ESC/POS Mode
Same as DTR signal
Not connected
• DIP Switch 9 = OFF
STAR Mode
Status of this signal is not checked.
ESC/POS Mode
In DTR/DSR communication mode when Memory Switch4-5 = 0, indicates whether data
receive from host is enabled or disabled.
Space: Receive enabled
Mark: Receive disabled
This signal is not checked in the X-ON/X-OFF communication mode.
• DIP Switch 9 = ON
This signal used for external reset. Printer is reset whenever signal is in mark state with
pulse width of 1mS or more.
Function
106
1
14