[Mode Settings]; Changing The Distance Display Unit (M/Yd); Changing The Target Priority Mode; Changing The Measurement Display Mode - Nikon ARROW ID 3000 Instruction Manual

[Mode settings]

■ Changing the distance display unit (m/YD)

En
Fr
Factory default setting is yard (YD).
1. Turn on the power (Confirm the internal display is on).
2. Press and hold the MODE button for more than 2 seconds.
When the display unit has been switched, release the button.

■ Changing the target priority mode

This Nikon Laser Rangefinder employs the First Target Priority/Distant Target Priority switching system.
(Factory default setting is First Target Priority mode).
1.Turn on the power (Confirm the internal display is on)
2. Press and hold the MODE button, then depress and hold the PWR button within 0.5 second.
Continue to press and hold both button (more than 2 seconds) until First Target Priority mode and
Distant Target Priority mode are switched.
3. Release both buttons when the mode is switched.
*If the buttons are not pressed in the correct order, switching will not take place.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.
12

■ Changing the measurement display mode

Horizontal Distance mode and Actual Distance mode can be switched.
(Factory default setting is Horizontal Distance mode.)
1. Turn on the power (Confirm the internal display is on).
2. Press and hold the MODE button, then immediately (less than 0.5 secnd) depress the PWR button for less
than 2 seconds.
3. Release your finger from the PWR button to switch the Measrurement display mode.
*If the buttons are not pressed in the correct order, switching will not take place.
Horizontal Distance mode
Horizontal
Distance
En
Fr
N/A Actual Distance mode
Actual
N/A Distance
13