X-Series Power Adapter Support Notice
The following notice will help on the application when you use the Power USB function of your Elo X-Series
For X-Series, the +19 volt 150W power adapter (E001060) can't support both +12 Volt Power USB and +24 Power USB at the same
•
time
unless great care is taken to check the total wattage of the system.
Do not exceed a total of 150 watts. Take the wattage below and add the Elo Peripherals or your other devices
•
and check that you are under 150 watts. If you need help with your application, please contact Elo support to
help you with the set up and calculations.
Max Power
15" models: 33W
Consumption (without
17" models: 38W
peripherals)
20" models: 39W
The Elo PNs corresponding power adapter model name list as below table
•
Configuration
ELO PN
X2/X3/X5/X7
E001060
Care and Handling
The following tips will help keep your touch computer functioning at an optimal level:
Disconnect the AC power cable before cleaning.
•
To clean the unit (except touchscreen), use a clean cloth lightly dampened with a mild detergent.
•
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does get inside, turn the unit off and have a qualified
•
service technician check it before you power it on again.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
•
To clean the touchscreen, use window or glass cleaner applied to a clean cloth or sponge. Never apply the cleaner directly to the
•
touchscreen. Do not use alcohol (methyl, ethyl or isopropyl), thinner, benzene, or other abrasive cleaners.
Ensure the environmental temperature and humidity are maintained within specification and do no block ventilation slots.
•
Touch computers are not designed for outdoors.
•
X2
X3
15" models: 55W
17" models: 60W
20" models: 71W
Part Description
AIO POWER BRICK, 19VOLT 150W
X5
15" models: 59W
15" models: 59W
17" models: 64W
17" models: 64W
20" models: 75W
20" models: 75W
.
.
X7
User Manual: X-Series
UM600139 Rev A, page 37 of 48