Elo TouchSystems X2 User Manual page 11

X-series, all-in-one touch computer
Table of Contents

Advertisement

12. +24 Volt Powered USB Port
The +24 Volt Powered USB Port spec is design for all X-Series models. The maximum power rating of the +24 Volt Power USB is 24
Volt at 2.3 Amps. Please ensure your power USB device does not exceed the following:
24 Volts at 2.3 Amps for a continuous load
-
Peak load or inrush current of 5 Amps for 100ms and 8 Amps for 2ms
-
13. Serial Port (COM1/RS-232)
The serial port is a standard native RS-232 interface connection.
14. VGA Output (D-Sub)
The X-Series system has a VGA output (D-Sub) to support a second display monitor.
15. USB 3.0 Port
Two standard Super Speed USB 3.0 ports are available on the rear input/output panel of the X-Series system.
16. USB Port Configuration
- Two USB 2.0 Ports for X2 / X3 system configuration only.
- Two USB 3.0 Ports for X5 / X7 system configuration only.
17. Ethernet LAN Port
The Ethernet LAN Port provides up to 1Gbps speed capability for networking the X-Series.
18. Serial Port (COM2/RJ-45)
The serial port is a native RS-232 specification for RJ-45 interface connection.
19. Audio port (Line-out)
The audio port is designed for X-Series headphone connectivity (Line-out).
User Manual: X-Series
UM600139 Rev A, page 10 of 48

Advertisement

Table of Contents
loading

This manual is also suitable for:

X3X7X5

Table of Contents