Adjusting Light - Invacare Colibri User Manual

Invacare® Colibri
1. Rotate or pull out the tiller adjustment lever A until the
pin disengages from the mounting hole.
2. Move the tiller to the desired position.
3. Release or rotate the tiller adjustment lever to lock the
pin into the desired mounting hole B.
4. Gently push/pull against tiller to ensure that the tiller is
securely locked.
Folding down the tiller
1. Rotate or pull out the tiller adjustment lever A until the
pin disengages from the mounting hole.
2. Fold down the tiller.
3. Release or rotate the tiller adjustment lever to lock the
pin above the tiller base B.
4. Gently push/pull against tiller to ensure that the tiller is
securely locked.
You can now use the tiller as a handle to transport the front
frame assembly:
24

4.8 Adjusting Light

If your mobility device is fitted with optional light, refer to
the user manual of the lights for information about usage.
The light must be used in bad visibility conditions
like darkness or fog.
Mounting Positions
Fig. 4-1 Mounting positions
Headlight
A
Rear Light
B
1576371-C