Re-Setup Of Main Program; When Panel Program Matches With Main Program - JUKI IP-310 Setup Manual

&. RE-SETUP OF MAIN PROGRAM
When you have purchased the single unit of IP-30 operation panel, the media card is packed together.
You can perform re-setup of the main program of MAIN circuit board on the control box side by using this
media card.
It is necessary that the main program and panel program have to match with each other.
If not, there is a possibility that trouble such as Error "E703 or E704" occurs. Be sure to perform setup by
using the media card which is packed together.

1. When panel program matches with main program

Perform the work by the procedure below when performing version-up of the main program by using the
media card.
) First, turn ON the power.
2) Insert the media card into the operation panel.
3) Perform operation by the procedure displayed in the screen below.
3
Data edit screen
) Press key 1
1
Communication screen 1
2) Press key 2 .
Data selection screen
3) Press key 3
4) Press key 4
4
d
–  –
for three seconds.
.
.
2