Static Route - D-Link DSL-2642B User Manual

Section 3 – Configuration
To access Static Route, point to the Routing on the left window and click Static Route submenu, or click the Static Route button in the Routing
window. The page allows you to manually enter the routing table.
To define a gateway and hop to route data traffic, complete the fields in
the Add Static Route section. Click Apply to see the entry in the Active
Static Route table. Go to Maintenance -> System and click Reboot to
restart the device and let your changes take effect.
To add a static route to a specific destination IP, click Add to see the Add
Static Route section. Enter a Destination IP address, Netmask and
Gateway's IP address. Select a PVC in the Connection drop-down list.
Click Apply to see the entry in the Active Static Route table. To remove
an entry in the table, click the corresponding
entry, click the corresponding
and then click the Apply button.
D-Link DSL-2642B User Manual

Static Route

button. To modify a table
button, make the desired changes,
87