Static Route - D-Link DSL-3788 User Manual

Section 4 - Configuration
The Static Routes section allows you to define custom routes to control how
data traffic is moved around your network. To access this page, click Static
Route from the Features menu on the bar on the top of the page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Create New Rule
Destination
Enter the destination IP address of packets that will take this route.
Address:
Destination Enter the destination for this route.
Subnet Mask:
Gateway IP
Enter your next hop gateway to be taken if this route is used.
Address:
Interface: Specify the interface the route will transit.
Metric: The route metric is a value from 0 to 15 that indicates the cost of
using this route.
Click Apply when you are done.
D-Link DSL-3788 User Manual

Static Route

56