D-Link DSL-2642B User Manual page 24

Section 3 – Configuration
QUICK SETUP – CONFIGURE WIRELESS NETWORK
Select Enable your Wireless Network by default and configure
the SSID, the Visibility Status of SSID and the Wireless network
security. The Wireless Network will be unsecure if the Security
Level is set to None. There are 3 security options the user can
choose: WEP, WPA-PSK or WPA2-PSK. After selecting the
Security mode, enter the security key below.
Deselect Enable your Wireless Network for skipping the
wireless configurations.
Click the Next button to go to the last step.
D-Link DSL-2642B User Manual 23