D-Link DSL-2642B User Manual page 53

Section 3 – Configuration
DHCP Server Settings: Here the user can add a DHCP Reserved
address.
Enable DHCP Server: Tick this option to enable this entry.
DHCP IP Address Range: Enter a reserved user's IP address in here.
DHCP Lease Time: Enter a reserved user's MAC address in here.
Click on the Apply button to accept these changes.
Click on the Cancel button to discard these changes.
DHCP Reservations List: To add an entry to the DHCP Reservation
List, click the Add button in the DHCP Reservation List section, type in
an IP Address, either click the Copy Your PC's MAC Address button or
manually enter a MAC Address, enter a Computer Name if desired, and
click the Apply button. To delete an entry from the DHCP Reservations
List, click the corresponding
Reservations List entry, click the corresponding
enter the information in the appropriate fields in the DHCP Reservation
List section.
Number of Dynamic DHCP Clients: Here the number of dynamic
DHCP clients will be listed. Information shown is Computer Name, MAC
Address, IP Address and Expire Time.
D-Link DSL-2642B User Manual
button. To modify a DHCP
button and then
52