Static Route - D-Link DSL-2730B User Manual

Section 3 – Configuration
To access Static Route, point to the Routing on the left window and click Static Route submenu, or click the Static Route button in the Routing
window. The page allows you to manually enter the routing table.
To define a gateway and hop to route data traffic, click Add to see the
Static Route Add section. Enter a Destination Network Address, and
Subnet Mask. Click the Use Gateway IP Address radio button and
enter the gateway IP address, or click the Use Interface radio button
and select an interface from the drop-down menu. Click Apply to see
the entry in the Active Static Route table. Go to Maintenance -> System
and click Reboot to restart the device and let your changes take effect.
To remove an entry in the table, select the entry, and click the Delete
button. To modify an entry in the table, select the entry, click the Edit
button, make the desired changes, and then click the Apply button.
D-Link DSL-2730B User Manual

Static Route

82