Dns Setup - D-Link DSL-2642B User Manual

Section 3 – Configuration
To access the DNS window, click the DNS button in the Advanced directory.
The Router can be configured to relay DNS settings from your ISP or
another available service to workstations on your LAN. When using DNS
relay, the Router will accept DNS requests from hosts on the LAN and
forward them to the ISP's, or alternative DNS servers. DNS relay can
use auto discovery or the DNS IP address can be manually entered by
the user. Alternatively, you may also disable the DNS relay and
configure hosts on your LAN to use DNS servers directly. Most users
who are using the Router for DHCP service on the LAN and are using
DNS servers on the ISP's network, will leave DNS relay enabled (either
auto discovery or user configured).
If you have not been given specific DNS server IP addresses or if the
Router is not pre-configured with DNS server information, select the
Obtain DNS server address automatically option. Auto discovery DNS
instructs the Router to automatically obtain the DNS IP address from the
ISP through DHCP. If your WAN connection uses a Static IP address,
auto discovery for DNS cannot be used.
If you have DNS IP addresses provided by your ISP, click the Use the
following DNS server addresses radio button and enter these IP
addresses in the available entry fields for the Preferred DNS Server and
the Alternative DNS Server. When you have configured the DNS
settings as desired, click the Apply button.
D-Link DSL-2642B User Manual

DNS Setup

69