Safety Information - Fluke IT200 User Manual

Safety Information

Table 1 describes the international electrical symbols used
on the tester and in this manual.
Table 1. International Electrical Symbols
W
Warning: Risk of personal injury. See explanations
in the manual.
Caution: Risk of damage or destruction to
equipment or software. See explanations in the
manual.
X
Warning: Risk of electric shock.
j
This equipment not for connection to public
communications networks, such as active
telephone systems.
~
Do not put circuit boards in the garbage. Dispose
of circuit boards in accordance with local
regulations.
P
Conformité
Européenne
WXWarning
•
Never use the toner or probe on circuits of more
than 100V.
;
Meets C-Tick EMC
standard
N10140
•
Never use the toner, probe, or test leads if they
are damaged. Inspect the cases and test leads
for damage before use.
•
Disconnect unused test leads and connectors
from the toner when testing telephone circuits.
•
Never open the case except to change the
battery; no user-serviceable parts are inside.
•
Turn off the toner or probe and disconnect all
test leads before replacing the battery.
•
Use only a 9V battery, properly installed in the
case, to power the toner and probe.
•
If this equipment is used in a manner not
specified by the manufacturer, the protection
provided by the equipment may be impaired.
WCaution
•
Avoid touching the probe tip to patch panel
connections and using the tip to dig into cable
bundles. Doing so regularly may damage the
probe tip over time.
•
To avoid unreliable test results, replace the
battery as soon as the low battery indication
appears.
Safety Information
5