Testing For Continuity - Fluke IT200 User Manual

Testing for Continuity

You can use the toner to test circuits and components for
continuity.
1. If you are testing a circuit, verify that it is not
powered. Use the toner's continuity E function to
check for continuity. Use a voltage meter to check
other types of circuits for power.
2. Turn off the toner.
3. Connect the toner to the circuit or component as
shown in Figure 5.
Turn the toner's rotary switch to E.
4.
A
5. The LED indicates an open or closed circuit as
shown in Figure 5.
Testing for Continuity
=
>10k
=
Figure 5. Continuity Test
ash09f.eps
15