Emerson Fisher FIELDVUE DVC5000 Instruction Manual Supplement page 12

DVC5000 Digital Valve Controller
May 2018
Command 15: Read Primary Variable Output Information
This command returns the upper/lower range values for the measured Valve Travel.
The range values can be changed via Command 35.
Byte
Request
None
Data bytes
0
1
Response
Data
2
Bytes
3-6
7-10
11­14
15
16
Code
Response
None
Codes
12
Format Description
PV Alarm Selection Code (see Common Table 6, Alarm
Selection Codes). The Alarm Selection Code indicates the
Enum
action taken by the device under error conditions. For
Actuators, the action taken by the positioner is indicated.
PV Transfer Function Code (see Common Table 3, Transfer
Function Codes). The Transfer Function Code must return
Enum
"0", Linear, if transfer functions are not supported by the
device.
Enum AI Upper and Lower Range Values Units Code
Float AI Upper Range Value
Float AI Lower Range Value
Float PV Damping Value
Enum Write Protect Code
Enum Reserved
Class Description
Instruction Manual Supplement
Returned Value
250 (Not Used)
250 (Not Used)
250 (Not Used)
D103266X012
57 (%)
42C80000
00000000
0 or 1