Operation Of Remote Control Buttons - Midea MIS26 Owner's Manual

Operation of Remote Control
Buttons.
1. ON/OFF BUTTON.
This button turns the Air Conditioner ON or
OFF
2. UP BUTTON
Press this button to increase the desired SET
temperature of the Air Conditioner or to
increase the Timer setting hours.
DOWN BUTTON
Press this button to decrease the desired SET
temperature of the Air Conditioner or to
decrease the Timer setting hours.
3. FAN BUTTON
Used to select the fan speed in four steps:
HIGH→MED→ LOW→ AUTO
NOTE:
Hold down this button for at least 2
•
seconds to activate or cancel Silent
mode. Due to low frequency operation
of the compressor, Silent mode may
result in insufficient cooling and
heating performance.
Pressing the Fan button
•
MODE button
or ECO button will cancel the
Silent mode.
4. FAN BUTTON
Used to select the fan speed in four steps:
AUTO→LOW→ MED→ HIGH
cannot be altered when unit is running in
AUTO or DRY mode.
NOTE:
Hold down this button for at least 2
•
seconds to activate or cancel Turbo
mode. Turbo function enables the unit
to reach the pre-set temperature in
cooling or heating operation in the
shortest time.
5. SWING BUTTON
Used to stop or start horizontal louver
movement (Up & Down). Pressing alternates
either continuous swing up & down or at angle
when button is pressed. Hold down this button
for 2 seconds to start/stop vertical louver
movement (Left to right). Pressing again for 2
seconds will stop left to right movement at
angle when button was pressed.
12
,
, ON/OFF button
Fan speeds