Midea MIS26 Owner's Manual page 14

7. ECO BUTTON
Used to enter the energy efficient mode.
When in cooling mode and after pressing this
button the remote controller will adjust the
temperature automatically to 24
speed of Auto to save energy (but only if the
previous set temperature was less than 24
If the user selected set temperature is between
O
24 C and 30
pressed, the fan speed will change to Auto but
the set temperature will remain unchanged.
NOTE:
Pressing the ON/OFF button, changing the mode or
adjusting the set temperature to less than 24
stop ECO operation.
Under ECO operation, the set temperature should be
O
24 C or more. If you feel uncomfortable due to
insufficient cooling in this mode then just press the
ECO button again to stop it.
8. MODE BUTTON
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO → COOL → DRY → HEAT → FAN
9. DO NOT DISTURB BUTTON
Press this button to turn off the indoor screen
Display and also to turn off the Air conditioner
Buzzer. The fan speed shifts to low which
creates a comfortable and quiet environment.
Pressing the button again cancels this
function.
Under DO NOT DISTURB mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
10. LOCK FUNCTION
Locking and unlocking the remote is done by
pressing the ECO
DO NOT DISTURB
the same time.
A symbol appears in the remote
control display window.
14
O
C and a fan
O
C, after the ECO button is
O
and the
buttons together at
O
C)
C will