Never activate any switches with
•
wet hands as it may cause an
electric shock.
Never use the device for any other
•
purpose than the intended use.
Never place objects on the unit.
Do not expose plants or animals
•
directly to the air flow.
Never use combustible cleaning
•
agents as these could cause a fire
or deformation of the unit.
Never place any burning objects
•
close to the device if they could be
directly affected by the emitted
air. (Candles etc)
Never step onto the outdoor unit
•
and never place anything on it.
Never use an unsteady or rusty
•
base for the outdoor unit
mounting.
Never install the air conditioner in
•
places where combustible gas can
be emitted as emitted gas may
collect and cause an explosion.
Never allow the air conditioner to
•
run for too long with the doors or
windows open.
If the air conditioner is to be used
•
in conjunction with other heating
appliances, the air in the room
should be refreshed periodically,
Always switch the unit off at the
•
Mains switch if the unit is not
going to be used for any lengthy
period of time.
Always switch off the air
•
conditioner during an electrical
storm otherwise, electrical parts
may get damaged.
Check that the condensate
•
drainage line is correctly
connected. If not, water will
escape onto furnishings in the
room
For electrical safety purposes it is
•
recommended that unit is
installed with an earth leakage
circuit-breaker.
NAMES OF PARTS
NAME OF PARTS
INDOOR UNIT:
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver (inside)
7. Display window
OUTDOOR UNIT:
8. Connecting pipe (Installer to supply)
9. Connecting cable (Installer to supply)
10. Stop valve
4