Remote Control Instructions - Midea MAP06S1JWT-B User Manual

REMOTE CONTROL INSTRUCTIONS

Handling the Remote Control
26.2 ft (8 meters)
NOTICE
Button design is based on typical model and may vary slightly from the actual
•
one you purchased.
All of the features listed in "Operating Instructions" can be operated using the
•
buttons on the control panel of the unit. If there is a feature listed in the "Operating
Instructions" that does not appear on your unit's control panel, then the unit does
not have that feature. If the remote control has a button for the missing feature, the
unit will still not respond when the button on the remote is pressed.
•
the remote control illustration and the actual functions described in the USER'S
MANUAL, the descriptions in the USER'S MANUAL should be followed.
NOTE: Some features such as ComfortSense, Timer, and Sleep Mode are
only available using the remote control. There will be no corresponding
button for these features on the control panel.
Remote Controller Specifications
Rated Voltage: 3.0V (Dry batteries R03/LR03x2)
Environment: 23°F ~140°F (-5°~60°)
Location of the remote control
Use the remote controller within a distance of 26.2 ft
(8 meters) from the air conditioner, pointing it towards
the receiver. Reception is confirmed by a beep.
CAUTION
The air conditioner will not operate if curtains,
•
doors or other materials block the signals from the
remote control to the unit.
Prevent any liquid from spilling onto the remote
•
control. Do not expose the remote control to
direct sunlight or heat.
If the infrared signal receiver on the indoor unit is
•
exposed to direct sunlight, the air conditioner may
not function properly.
If other electrical appliances react to the remote
•
control, either move these appliances or consult
your local dealer.
19