How The Air Conditioner Works - Midea MIS26 Owner's Manual

How the Air Conditioner Works.

Basic operation modes:
AUTO/COOL/DRY/HEAT
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating or fan only
operation depending on your required SET
temperature and the current room temperature.
The air conditioner will control room temperature
automatically to the temperature point you set.
If you feel uncomfortable in the AUTO mode, you can
set your desired temperature.
SLEEP OPERATION
When selected, the set temperature will increase
(cooling) or decrease (heating) by 1
first 2 hours. Thereafter it keeps this new temperature
for 5 hours before switching off.
This operation saves energy and improves night time
comfort by synchronising with the body's metabolism.
O
C per hour for the
7
DRYING OPERATION
The temperature is regulated while dehumidifying by
The unit repeating turning on and off the cooling
operation or fan only. The fan speed is set to LOW.
HEATING OPERATION
This air conditioner operates on the heat-pump
principle, absorbing heat from air outdoors and
transferring that heat to the indoor unit. As a result, the
operating performance is reduced as outdoor air
temperature drops.
.
OPTIMAL OPERATION
To achieve optimal performance, please note the
following:
Adjust the air flow direction correctly so that it is not
torwards people.
Adjust the temperature to achieve moderate comfort
levels. Excessively low or high temperature waste
energy.
Improve performance by keeping windows and doors
closed.
Limit energy usage (run time) by using the TIMER
function.
Do not put any object near air inlet or air outlet, as the
efficiency of the air conditioner may be reduced and
may cause the air conditioner to stop running.
Inspect the air filters periodically, and clean them when
needed.